Tripp Lite 10000VA 9000W UPS Smart Online Rackmount 10kVA 200V – 240V 6URM

OUTPUT Output Volt Amp Capacity (VA) 10000 Output kVA capacity (kVA) 10 Output Watt Capacity (watts) 9000 Output kW capacity 9.0 Output power factor 0.9 Output Capacity Details Supports up to 105% load continuously in double conversion mode, 106 to 125% for 1 minute, 126% to 150% for 30 seconds; Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power; Double conversion mode is automatically restored as load levels are reduced to 95% or less Nominal Output Voltage(s) Supported 200V; 208V; 220V; 230V; 240V Nominal Voltage details Voltage selection via front panel LCD interface Frequency compatibility 50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion Frequency compatibility details Output frequency matches input nominal on startup; Frequency conversion mode enables conversion of 60Hz to 50Hz or 50Hz to 60Hz (no de-rating) Output voltage regulation (line mode) /- 2% Output voltage regulation (Economy line mode) /- 10% Output voltage regulation (Battery mode) /- 2% Built-in UPS output receptacles Hardwire Output AC waveform (AC mode) Pure Sine wave Output AC waveform (battery mode) Pure Sine wave INPUT Rated input current (at maximum load) 56.1A (200V), 54A (208V), 51A (220V), 48.8A (230V), 46.8A (240V) Nominal Input Voltage(s) Supported 200V AC; 208V AC; 220V AC; 230V AC; 240V AC UPS input connection type Hardwire UPS input connection description 3 wire single phase input (L1, L2, G) Recommended Electrical Service 60A Phase Single-Phase BATTERY Full load runtime (minutes) 4.3 min. (9000w) Half load runtime (minutes) 12.5 min. (4500w) Expandable battery runtime Supports extended runtime with optional external battery packs External battery pack compatibility BP240V10RT3U; BP240V557C-1PH; BP240V787C-1PH; BP240V1037C-1PH; BP240V1407C-1PH DC system voltage (VDC) 240 Battery recharge rate (included batteries) Less than 8 hours from 10% to 90% Battery replacement description Hot-swappable, user replaceable external battery packs VOLTAGE REGULATION Voltage regulation description 2% output voltage regulation in standard online, double-conversion mode Overvoltage correction Corrects overvoltages up to 300V Undervoltage correction Corrects undervoltages as low as 100V LEDS ALARMS & SWITCHES LED Indicators 6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCD screen offers additional information and control options Front panel LCD display Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options; LED/LCD panel rotates for viewing in rack/tower formats; LCD Display supports ENGLISH, FRENCH, GERMAN, ITALIAN, SPANISH and PORTUGUESE (see manual) Alarms Unique audible alarms for all major UPS, environmental and power conditions (see manual) Alarm cancel operation Alarm cancel switch Switches 2 Switches control off/on power status and alarm-cancel/self-test operation; 2 additional switches support set and execute scrolling LCD functions; bundled PDU includes bypass switch to enable hot-swap UPS power module replacement SURGE / NOISE SUPPRESSION UPS AC suppression response time Instantaneous EMI / RFI AC noise suppression Yes PHYSICAL Installation form factors supported with included accessories Tower Included mounting accessory description 2 sets of adjustable 4 post rack rails included; 2-9USTAND tower kit included Installation form factors supported with optional accessories 2 post rackmount (2POSTRMKITHD) Optional mounting accessory notes 2 sets of 2POSTRMKITHD required for 2 post rackmount installation Primary form factor Rackmount UPS / Power Module dimensions in primary form factor (height x width x depth / inches) 5.14 x 17.5 x 25.82 UPS / Power Module dimensions in primary form factor (height x width x depth / cm) 13.1 x 44.4 x 65.6 Installed whole system maximum rack depth (inches) 32.5 Installed whole system maximum rack depth (cm) 82.6 Rack Height 6U Secondary form factor Tower UPS / Power Module weight (lbs) 43 UPS / Power Module weight (kg) 19.5 Included battery pack dimensions (height x width x depth / inches) 5.25 x 17.5 x 25 Included battery pack dimensions (height x width x depth / cm) 13.3 x 44.4 x 63.5 Included battery pack weight (lbs) 158.7 Included battery pack weight (kg) 72 UPS Shipping dimensions (height x width x depth / inches) 38.25 x 31.5 x 23 UPS Shipping dimensions (height x width x depth / cm) 97.2 x 80 x 58.4 Shipping weight (lbs) 327.6 Shipping weight (kg) 148.7 Cooling method Fan UPS housing material Steel ENVIRONMENTAL Operating Temperature Range 32 to 104 degrees Fahrenheit / 0 to 40 degrees Celsius Storage Temperature Range 5 to 122 degrees Fahrenheit / -15 to 50 degrees Celsius Relative Humidity 0 to 95%, non-condensing AC mode BTU / hr. (full load) 3415 AC economy mode BTU / hr. (full load) 1275 AC economy mode efficiency rating (100% load) 96% Operating Elevation (ft.) 0-3000m (0 to 10,000 ft.) Audible Noise 60 dBA at front side 1 meter Operating Elevation (m) 0-3000 m COMMUNICATIONS Communications interface USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface Network monitoring port description Additional contact closure support with optional RELAYIOCARD and RELAYIOMINI interface cards. RELAYIOMINI installation requires removal of panel containing USB ports PowerAlert software Included Communications cable USB, DB9 serial and EPO cables included WatchDog compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications LINE / BATTERY TRANSFER Transfer time No transfer time (0 ms.) in online, double-conversion mode Transfer time (economy mode) 8 ms. typical power failure response in optional economy mode Low voltage transfer to battery power (setpoint) 100V High voltage transfer to battery power (setpoint) 300V SPECIAL FEATURES Cold Start (startup in battery mode during a power failure) Cold-start operation supported Economy mode operation Optional economy mode enables high efficiency bypass operation with a maximum output voltage variation of /-10%. Double conversion mode is automatically restored as mains voltage varies beyond /-10% with less than 1 millisecond transfer time between modes. High availability UPS features Automatic inverter bypass; Manual bypass switch; Detachable hot-swap PDU; Hot swappable UPS power module; Hot swappable batteries Green & high efficiency features High efficiency economy mode operation; Schedulable daily hours of economy mode operation CERTIFICATIONS UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); CE; Meets FCC Part 15 Category A (EMI) UPS Certification details IEC 61000-4-5 1995 B Surge Immunity